Ambirad VISION VSO Instructions d'exploitation télécharger pdf (Page 12)

Step 3 On forced burners with ducted air

attachment, slacken jubilee clip and remove

flexible hose from the fan.

Step 4 Slacken both grub screws on the burner

support casting using a 4mm Allen key to

enable the burner to be removed from the

radiant tube.

Step 5 Carefully remove the burner to prevent it

or any components from falling to the ground

and position the assembly in a safe area.

3.4 Burner Gas Injector Servicing

Step 1 Remove the burner support casting and

gasket.

Step 2 The burner head assembly can be

disconnected by separating the connectors of

the ignition lead assembly and removing the

pressure switch silicon tube.

Step 3 The gas injector can be inspected and

replaced if contaminated or blocked.

When replacing the gas injector use a

12mm spanner and ensure approved

thread sealant is used.

Step 4 Refit the burner support casting and

replace the gaskets to ensure effective sealing.

3.5 Burner Head and Electrode Servicing

Step 1 Check the pepper pot burner head for

contamination. If necessary the head can be

removed for cleaning of the inside of the burner

head, see below.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Commentaires sur ces manuels

Pas de commentaire